Concrete Pumps
K-Axle
The K-Axle is the all new high speed electric motor and pump unit for construction vehicles. A scalable 50cc single or tandem unit able to operate at speeds of up to 5,000 rpm
- Compact size
- High efficiency
- Highly flexible
KMP
The KMP series main control valves provide proportional control of agricultural and mobile machinery. They give precise control with pressure compensation and the internal pilot system eliminates the need for external pilot pressure sources.
- 80 l/min inlet flow
- 310 bar pressure rating
- Electro-hydraulic actuation
- Manual override levers for emergency
KLSV
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency.
- Post-compensated, flow-sharing design
- Hydraulic pilot and electro-hydraulic actuation
- 400 bar continuous pressure rating
- Special versions for wheel loaders, midi excavators and skid steer loaders
- Three sizes with sectional flow rates of 180, 250 and 400 l/min
K3VL
The K3VL series swash plate type axial piston pumps are designed to satisfy a variety of construction and off-highway applications where a medium to high pressure variable displacement pump is required.
- 28 to 200cc displacements
- 320 bar continuous pressure rating
- Load sensing, torque limiting and electronic displacement control
- Integral impellor pump available on 200cc unit
K3V/K5V/K7V
The K3V/K5V/K7V pump range has been specifically designed to meet the demands of hydraulic excavators and other mobile machinery. The introduction of the K7V offers a step change in hydraulic pump efficiency.
- 63 to 212cc displacements available
- 350 bar continuous pressure rating
- Single, tandem and parallel versions
- Wide range of power, pressure and displacement controls available.
K7VG
The K7VG series of high-pressure swash plate type pumps was developed for general industrial machinery use. The adoption of the high-load bearings and friction-free contacting mechanism of piston shoes, results in a high level of reliability and long life.
- 180 and 265cc displacements
- 350 bar continuous pressure rating
- Long bearing life
- ISO Mount and Shaft
- Optional through-drive
- Highly responsive controls
M3X/M3B
The M3X and M3B series are swash plate type axial piston motors in fixed (M3X) and variable (M3B) displacement versions. They are used extensively in mobile crusher drives, cranes and drill rigs.
- 200, 280, 530 and 800cc displacements
- 300 bar continuous pressure rating
- Constant horsepower control option
- Available with parking brake